Description

PicKit 3.5 Price in Pakistan | Dspic30f2010 Programmer with Base

The PICkit 3.5 is a debugger and programmer from Microchip (now Microchip Technology Inc.) used for flashing and debugging PIC® and dsPIC® microcontrollers. It connects to a PC via USB and interfaces with the target microcontroller using ICSP (In-Circuit Serial Programming).Chip.pk give Best Pickit 3.5 Price in Pakistan.

Pickit 3.5 Version:-

The PICkit™ 3.5 is an upgraded version of the PICkit 3 from Microchip, offering:

•  Faster programming speeds
•  Support for newer PIC/dsPIC MCUs (including dsPIC30F2010)
•  Improved USB connectivity & stability
•  Works with MPLAB X IDE & MPLAB IPE

🔹 Key Differences from PICkit 3:

• Enhanced firmware (better compatibility)
• Supports more voltage levels (1.8V–5V)
• Works with newer MPLAB versions

2. How to Program dsPIC30F2010 with PICkit 3.5

🔌 Step 1: Hardware Connections (ICSP Pinout)

⚠ Important Notes:

• Power the target board externally (recommended) or enable “Power target from PICkit” in MPLAB.
• Add a 0.1μF capacitor between VDD & GND for stability.
• A 10μF capacitor on MCLR helps prevent reset issues.

💻 Step 2: Software Setup

1. Install MPLAB X IDE (Download)
2. Install XC16 Compiler (Download)
3. Connect PICkit 3.5 to PC via USB (drivers install automatically).

📝 Step 3: Create & Compile Code

Example: Blink LED on RB0

#include <xc.h>

#pragma config FOSC = FRC      // Internal Fast RC Oscillator  
#pragma config WDT = OFF       // Watchdog Timer OFF  

#define LED LATBbits.LATB0     // LED on RB0  

void delay_ms(unsigned int ms) {  
    while (ms--) __delay32(16000); // ~1ms @ 7.37MHz  
}  

int main() {  
    TRISB = 0x0000;   // PORTB as output  
    LATB = 0x0000;    // Clear PORTB  

    while (1) {  
        LED = 1;      // LED ON  
        delay_ms(500);  
        LED = 0;      // LED OFF  
        delay_ms(500);  
    }  
}

✅ Compile:

• Click “Clean and Build” (Shift+F11) to generate .hex file.

⚡ Step 4: Program the dsPIC30F2010

1. Select PICkit 3.5 as the tool in MPLAB X.
2. Click “Make and Program Device” (F11).
3. If successful, you’ll see:
   Copy

   Programming/Verify complete

4. The LED should blink at 500ms intervals.

🐞 Step 5: Debugging (Optional)

• Click “Debug Project” (Ctrl+F5) to step through code.
• Use breakpoints & watch windows for troubleshooting.

3. Troubleshooting PICkit 3.5 Issues

4. Alternative: Using MPLAB IPE (Quick Flash)

If you only need to flash a .hex file:

1. Open MPLAB IPE.
2. Select PICkit 3.5 and dsPIC30F2010.
3. Load .hex → Click “Program”.

Conclusion

• PICkit 3.5 is an improved PICkit 3 with better speed & compatibility.
• Works seamlessly with dsPIC30F2010 using MPLAB X IDE.
• Ensure proper ICSP wiring & power supply for reliable programming.

Difference Between PICkit 3 and PICkit 3.5

The PICkit 3.5 is an upgraded version of the PICkit 3, offering several improvements while maintaining backward compatibility. Here’s a detailed comparison:

🔹 Key Differences at a Glance

🔹 Detailed Comparison

1. Hardware Improvements

• PICkit 3.5 has a USB-C connector (more durable than Micro-USB in PICkit 3).
• Better voltage regulation (supports 1.8V–5.5V vs. 2.0V–5.5V in PICkit 3).
• Improved ESD protection (less prone to damage from static electricity).

2. Firmware & Performance

• PICkit 3.5 is ~3x faster for programming (optimized algorithms).
• Supports newer Microchip MCUs (PICkit 3 lacks support for some modern chips).
• More reliable auto-detection of target voltage.

3. Software & Compatibility

• PICkit 3.5 works better with MPLAB X IDE (fewer disconnection issues).
• PICkit 3 may require legacy drivers (PICkit 3.5 uses modern plug-and-play USB).
• PICkit 3.5 supports advanced debugging (real-time variable watching, complex breakpoints).

4. Price & Availability

• PICkit 3 is discontinued (only available used).
• PICkit 3.5 is still sold by Microchip (~$50–$60).

🔹 Which One Should You Use?

🔹 Conclusion

• PICkit 3.5 is the better choice for most users due to speed, reliability, and modern compatibility.
• PICkit 3 is still usable but may lack support for newer chips.
• If possible, upgrade to PICkit 3.5 (or consider PICkit 4 or Snap for future-proofing).

Customer Support:-

• Available 24/7
• Phn # 03091416242
• Mail # Cpakstore@gmail.com

Package Include:-

• 1 X Dspic30f2010 Programmer Pickit 3.5

Social Media:-

• Facebook
• Instagram