DSPIC30F2010 Price in Pakistan | 28-Pin Microcontroller
The dsPIC30F2010 is a 16-bit Digital Signal Processor (DSP) microcontroller from Microchip Technology. It belongs to the dsPIC30 family, which is designed for real-time, high-performance signal processing applications, such as audio, motor control, and communication systems.Chip.pk give best DSPIC30F2010 Price in Pakistan.Here’s a summary of its key features:
Key Features:
Core:
16-bit CPU, optimized for DSP applications with a Harvard architecture.
Includes an 8-level deep hardware stack.
Performance:
Maximum clock speed of up to 30 MIPS (Million Instructions Per Second).
Enhanced with single-cycle instruction execution to improve processing speed.
Memory:
32 KB Flash memory for program storage.
2 KB RAM for data storage.
256 Bytes of EEPROM for non-volatile data storage.
Timers & PWM:
Multiple 16-bit timers and PWM (Pulse Width Modulation) outputs, commonly used in motor control and signal generation.
Analog to Digital Converter (ADC):
10-bit ADC with up to 16 channels, making it suitable for signal conditioning in analog signal processing applications.
Digital Peripherals:
SPI (Serial Peripheral Interface), I2C, UART, and CAN for communication interfaces.
Enhanced capture/compare modules for handling PWM signals and event timing.
Interrupt System:
Prioritized interrupt system with 5 interrupt priority levels.
Package Options:
Available in 20-pin, 28-pin, and 44-pin packages, which makes it suitable for a variety of designs.
Power Consumption:
Low power consumption in idle modes, which is crucial for battery-operated applications.
Typical Applications:
Motor Control: Due to its high-speed processing and PWM capabilities.
Audio Processing: For real-time audio effects and signal conditioning.
Sensor Signal Conditioning: In environments where high-precision ADCs are required.
Communication Systems: With built-in peripherals like UART, SPI, and CAN for data transmission.
If you’re designing something with this microcontroller, do you need help with coding, interfacing specific peripherals, or something more hardware-focused?
Processor Architecture:
The dsPIC30F2010 uses the dsPIC30 architecture, which combines elements from both digital signal processors (DSP) and microcontrollers (MCU). This makes it highly efficient for tasks that require real-time signal processing while still retaining the flexibility of general-purpose microcontrollers.
Instruction Set: It has a modified Harvard architecture, which means the program and data memory are separate, allowing for simultaneous fetches from both. It has a 16-bit instruction word, and the instructions are optimized for signal processing tasks.
DSP Features: The device includes hardware support for:
MAC (Multiply-Accumulate) operations, which are crucial for real-time signal processing like FIR and IIR filtering.
Shift and rotate operations, ideal for handling signals and performing transformations (FFT, etc.).
Saturation arithmetic and automatic overflow detection, which are useful for signal processing to prevent data corruption in real-time calculations.
Memory Structure:
Flash Memory:
The 32 KB Flash is divided into program memory and bootloader space. The flash memory can be reprogrammed in-circuit (via ICSP) and is often used to store the application code.
RAM:
With 2 KB of RAM, this is typically sufficient for handling temporary variables and buffers for signal processing algorithms. In DSP applications, RAM is crucial for storing intermediate data, like the results of FFTs or filters.
EEPROM:
256 Bytes of EEPROM are available for non-volatile data storage, which is commonly used for settings, calibration data, or parameters that need to persist across power cycles.
Peripherals & I/O:
Timers and PWM (Pulse Width Modulation):
The dsPIC30F2010 includes 3 timers (Timer1, Timer2, and Timer3), which can be used for generating time delays, measuring time intervals, or driving PWM outputs.
The PWM module supports up to 4 channels, allowing for motor control, LED dimming, and other applications requiring varying signal duty cycles.
Analog-to-Digital Converter (ADC):
The 10-bit ADC on the dsPIC30F2010 allows you to sample analog signals, such as sensor data, at high speeds. The multiple input channels (up to 16 on some versions) let you connect multiple analog signals and convert them to digital for processing.
It’s suitable for real-time processing of sensor data (e.g., temperature, pressure, or voltage signals).
Serial Communication:
SPI, I2C, and UART interfaces are built into the dsPIC30F2010, making it easy to connect to peripherals like sensors, external memory, or other microcontrollers. The CAN interface is also available on some variants of the dsPIC30 family for automotive or industrial communication.
Capture/Compare Modules:
The capture/compare units can be used to measure the time between external events or to output PWM signals. These are critical in motor control and other real-time systems where precise timing is needed.
Watchdog Timer:
For fault-tolerant operation, the dsPIC30F2010 has a watchdog timer that can reset the device in case of a software failure, ensuring the system recovers to a known state.
Voltage Reference:
The microcontroller has internal voltage references (e.g., 2.048V) for driving the ADC, ensuring accurate and consistent analog-to-digital conversion, especially in low-voltage and precision applications.
Low-Power Operation:
The dsPIC30F2010 includes several low-power modes, such as Idle and Sleep modes, which are useful for battery-powered applications.
In Idle mode, the core is stopped, but peripherals like the ADC, timers, and communication modules can still function.
In Sleep mode, the entire device can be powered down to minimize power consumption, with only a small portion of the microcontroller remaining active (like the Watchdog timer or a specific interrupt source).
Development Tools & Support:
Microchip provides a rich suite of development tools for programming and debugging dsPIC30F2010-based systems, including:
MPLAB X IDE: The integrated development environment where you can write, compile, and debug your application.
MPLAB X C30 Compiler: A dedicated C compiler for the dsPIC30/33 family.
In-Circuit Debugger (ICD) or PICkit Programmer: For programming and debugging the microcontroller.
Programming in C:
The dsPIC30F2010 is typically programmed in C, and you can access specialized libraries for signal processing. For example:
DSP Library: Microchip provides DSP-specific libraries that contain ready-to-use functions for filters, Fourier transforms, and other DSP operations.
Interrupts and DMA: Interrupts and Direct Memory Access (DMA) capabilities are essential for efficiently managing signal processing tasks without wasting CPU time.
Typical Applications:
Motor Control:
Brushless DC motors (BLDC), Step Motors, and Servo Motors can be controlled with PWM signals generated by the dsPIC30F2010. You can use the ADC to read current or voltage feedback and make adjustments in real-time.
Signal Conditioning & Filtering:
Real-time filtering (FIR, IIR) or signal conversion from analog to digital (e.g., audio or sensor signals) are common applications. The dsPIC30F2010 can perform these operations in real time, often using hardware features like the Multiply-Accumulate (MAC) unit to optimize performance.
Audio Processing:
Applications like audio equalization, noise cancellation, and tone generation are excellent use cases, where you need to process the signal in real-time using DSP techniques.
Industrial Automation:
The dsPIC30F2010 is often used in control systems where you need fast real-time response to sensor data, like PLC (Programmable Logic Controllers) or temperature/pressure sensors.
Communication Systems:
It can be used in systems that require high-speed data transfer, error correction, or modulation/demodulation, like modems, RF communication, or data converters.
There are no reviews yet.