Description
This is Arduino Basic Kit price for punjab government order. here are list of required products.
| ARDUINO BASICS KIT | ||||||||||||||||||||||||||
| Sr. | Item(s) | Image | Item Details | Qty | ||||||||||||||||||||||
| 1 | Arduino UNO R3 | Microcontroller ATmega328P DIP ATMEGA32u4 USB Convertor Operating Voltage 5V Input Voltage 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 PWM Digital I/O Pins 6 Analog Input Pins 6 Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB Clock Speed 16 MHz LED_BUILTIN 13 |
1 | |||||||||||||||||||||||
| 2 | Arduino Cable | USB 2.0 Cable Type A/B Shielded Heavy Duty Connect Arduino Uno or any board with the USB female A port of your computer. |
1 | |||||||||||||||||||||||
| 3 | Arduino UNO Case | Arduino Uno Enclosure – Clear Plastic The enclosure provides slots to access each header, USB port, power jack, the reset button, AREF and ICSP connectors, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots. All of the status LEDs on the Uno are visible through the case thanks to light pipes embedded in the design. |
1 | |||||||||||||||||||||||
| 4 | Power Adaptor | High quality switching ‘wall wart’ AC to DC 9V 1000mA wall power supply manufactured specifically for Electronics. These are switch mode power supplies which mean the output is regulated to 9V and the capable output current is much higher (1000mA!). These will power most projects that don’t require more than 1000mA of current. Works with most devices that use a 9V adaptor and less than 1A of power. |
1 | |||||||||||||||||||||||
| 5 | Prototyping Board | |||||||||||||||||||||||||
| Bitmap Bitmap Bitmap Bitmap | Model: MB-102 Dimension: 16.7 x 5.7 x 1cm Tie Points: 830 tie points (consists of: 630 tie-point terminal strip, 200 tie-point distribution strips) Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each Wire size: Suitable for 20~29 AWG (0.3mm~0.8mm) wires |
1 | |||||||||||||||||||
| 6 | LED Red 5mm | 5mm Diffused 1.8-2.2VDC forward drop Max current: 20mA Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd |
5 | ||||||||||||||||||||||
| 7 | LED Green 5mm | 5mm Diffused 1.8-2.2VDC forward drop Max current: 20mA Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd |
5 | ||||||||||||||||||||||
| 8 | LED Blue 5mm | 5mm Diffused 1.8-2.2VDC forward drop Max current: 20mA Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd |
5 | ||||||||||||||||||||||
| 9 | RESISTOR 220R (10 Pcs Pack) |
220 Ohm Resistance 10pcs pack 1/4 Watt PTH Thick Leads Tolerance: +/-5 ohms |
1 | ||||||||||||||||||||||
| 10 | RESISTOR 1K (10 Pcs Pack) |
1 kilo Ohm Resistance 10pcs pack 1/4 Watt PTH Thick Leads Tolerance: +/-5 ohms |
1 | ||||||||||||||||||||||
| 11 | RESISTOR 10K (10 Pcs Pack) |
10 kilo Ohm Resistance 10pcs pack 1/4 Watt PTH Thick Leads Tolerance: +/-5 ohms |
1 | ||||||||||||||||||||||
| 12 | Jumper Wire: Male to Male Bundle 65 Pcs |
65 Pcs Pack Length: 25 cm x 4 Pcs 20 cm x 4 Pcs 15 cm x 8 Pcs 10 cm x 49 Pcs 0.1″ male header contacts on both ends Standard 0.1″ (2.54mm) spacing when placed next to each other Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black Gauge: 28 AWG (0.0126”) |
1 | ||||||||||||||||||||||
| 13 | Jumper Wire: Male to Female strip 10 Pcs | 10 Pcs Pack Length: 30cm 0.1″ Female header contacts on one end, 0.1″ male header contacts on other end Standard 0.1″ (2.54mm) spacing when placed next to each other Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black Gauge: 28 AWG (0.0126”) |
1 | ||||||||||||||||||||||
| 14 | Potentiometer 50k | 1x Rotary Potentiometer – 50k Ohm, Logarithmic 1x Mounting Nut 1x Washer Electrical Characteristics Taper: Linear, audio Standard Resistance Range: 1K – 10K ohms Standard Resistance Tolerance: ±20 % Residual Resistance: 1 % max. Environmental Characteristics Operating Temperature …-10 °C to +50 °C Power Rating Linear: 0.2 watt Dual Section: 0.125 watt Audio: 0.1 watt Dual Section: 0.06 watt Maximum Operating Voltage Linear : 200 V Audio: 150 V Sliding Noise: 47 mV max |
1 | ||||||||||||||||||||||
| 15 | Active Buzzer | Rated Voltage: 6V DC Operating Voltage: 4-8V DC Rated current: <30mA Sound Type: Continuous Beep Resonant Frequency: ~2300 Hz Small and neat sealed package Breadboard and Perf board friendly |
1 | ||||||||||||||||||||||||
| 16 | 74HC595N | 8-Bit Serial-In, Parallel-Out Shift Wide Operating Voltage Range of 2 V to 6V High-Current 3-State Outputs Can Drive Up To 15 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 14 ns ±6-mA Output Drive at 5 V Low Input Current of 1 µA Max Shift Register Has Direct Clear |
1 | ||||||||||||||||||||||||
| 17 | IR Reciever Module | Bitmap Bitmap Bitmap | Infrared sensor receiver module KY-022 Specifications: Infrared remote control distance: more than 8 meters Launch tube infrared wavelength: 940Nm Crystal frequency: 455KHZ crystal Carrier frequency: 38KHZ Encoding: encoding format for the NEC Size: 86 * 40 * 6mm Power: CR2025/1600mAH |
1 | |||||||||||||||||||||||
| 18 | Temprature/Fla me Sensor | Bitmap Bitmap Bitmap Bitmap | KY-013 Analog Temperature Sensor module consist of a NTC thermistor and a 10 kΩ resistor. The resistance of the thermistor varies with surrounding temperature |
1 | |||||||||||||||||||||||
| 19 | Tilt switch module | KY-020 Tilt Switch consists of a 10kΩ resistor and a metallic ball switch with bidirectional conduction that will open/close the circuit depending on its tilt degree. It does not measure tilt angle. |
1 | ||||||||||||||||||||||||
| 20 | LDR 5mm | LDR (Light Dependant Resistor) Diameter : 5mm No. of Pins : 2 Type of Mounting : PCB Through Hole Maximum Operating Temperature : +800C (Approx.) Dark resistance:1-20M ohm Voltage, ac or dc peak: 100V Current: 5mA Operating temperature range: -25°C +75°C |
2 | ||||||||||||||||||||||||
| 21 | Button Switch with Cap | With Button Cap Dimensions: 12 mm General Tolerance: X.X=±0.4 X.XX=±0.25 Rating 50mA @ 12VDC 5. Operating Force: 160 `50 gms Travel: 0.35mm ±0.1 Contactless Resistance: 100 mOhms Mechanical/Electrical Life 200,000 cycles/Min. Insulation Resistance: 100M OHMS Min. at 500VAC Dielectric Strength: 250VAC For 1 Min 2002/95/EC (ROHS) Compliant |
4 | ||||||||||||||||||||||||
| 22 | 1X IR remote control | Remote control distance: more than 8 meters Launch tube infrared wavelength: 940Nm Crystal: the oscillation frequency of 455 KHz IR carrier frequency: 38KHz Encoding: the encoding format of the NEC, upd6122 encoding scheme, the user code 00FF, key coding below picture Size: 86 * 40 * 6mm Frequency: 38K Power supply: CR2025/160mAH Button: free height is less than 3mm, the force 200- 350g, the life of more than 200,000 button presses |
1 | ||||||||||||||||||||||||
| 23 | Four digital tube | This is a high quality, 4-digit 7-segment display – red in color. It has a common cathode. The display features one decimal point per digit, and individually controllable apostrophe and colon points. The LEDs have a forward voltage of 2.1VDC and a max forward current of 20mA. The hardware interface is sixteen (two rows of eight) through-hole pins. Dimensions: Overall Display: 40.18 x 12.8 mm (1.58 x 0.50″) Digit Height: 10mm (0.39″) |
1 | ||||||||||||||||||||||
| 24 | One digital tube | Common Cathode, 14.2mm, Red Digit Size: 14.2mm x 8.1mm Current consumption : 30mA / segment Peak current : 70mA Reverse Voltage: 3V Operating Temperature: -25°C to +85°C |
1 | ||||||||||||||||||||||
| 25 | 5V Stepper motor with ULN2003 Driver Module |
28BYJ-48 With Driver Module ULN2003 64 steps per rotation (5.625 degrees per step) Diameter: 28mm Length: 274mm Shaft Size: 5mm diameter x 8mm long Mounting Hole Distance: 32mm center to center Mount Hole Diameter: 4mm |
1 | ||||||||||||||||||||||
| 26 | Servo MG90S | Servo MG90S (Metal gear) Maximum Rotation: 0° – 180° Weight: 13.4g Dimension: 22.8×12.2×28.5mm Stall torque: 1.8kg/cm (4.8V); 2.2kg/cm (6.6V) Operating speed: 0.10sec/60 degree (4.8V); 0.08sec/60 degree (6.0V) Operating voltage: 4.8V Temperature range: 0 °C -55 °C Dead band width: 1us Power Supply: Through External Adapter servo wire length: 25 cm Servo Plug: JR (Fits JR and Futaba) 3 Servo Plastic Arms & 3 screws included |
1 | ||||||||||||||||||||||
| 27 | LCD1602 IIC I2C | 16×2 Blue, Backlight I2C breakout Module for LCD (soldered) LED is 16-Character 2-Line, blue Screen and white Character (STN Negative Blue) Be I2C-Bus Interface that can connect 8 devices together in the same bus (setup different Address) Supply voltage: 5V Interface:I2C/TWI x1,Gadgeteer interface x2 Adjustable contrast Size: 80x36x20mmz(3.1×1.4×0.7in) |
1 | ||||||||||||||||||||||
| 28 | DHT11 Digital Temperature and Humidity Sensor | KY-015 Operating Voltage: 3.5V to 5.5V Operating current: 0.3mA (measuring) 60uA (standby) Output: Serial data Temperature Range: 0°C to 50°C Humidity Range: 20% to 90% Resolution: Temperature and Humidity both are 16- bit Accuracy: ±1°C and ±1% |
1 | ||||||||||||||||||||||
| 29 | Water level measurement module | Water sensor brick is designed for water detection, which can be widely used in sensing the rainfall, water level, even the liquate leakage. The brick is mainly comprised of three parts: An Electronic brick connector, a 1 M resistor, and several lines of bare conducting wires. | 1 | ||||||||||||||||||||||
| 30 | RFID module MFRC-522 | RFID Card Inductive Module with Key Chain Specifications: Current :13-26mA / DC 3.3V Idle Current :10-13mA / DC 3.3V Sleep current: <80uA Peak current: <30mA Operating Frequency: 13.56MHz Supported card types: S50, S70, UltraLight, Pro, Desfire Product Physical Characteristics: Dimensions: 40mm × 60mm Environmental Operating temperature: -20-80 degrees Celsius Environment Storage temperature: -40-85 degrees Celsius Relative Humidity: 5% -95% Data Transfer Rate: Max. 10Mbit / s Package Included: 1 X RFID-RC522 module one; 1 X Standard S50 Blank Card; 1 X S50 shaped cards one (as shown keychain shape); 1 X Straight row pin |
1 | ||||||||||||||||||||||
| 31 | SOUND MODULE | KY 037 High Sensitivity microphone sound sensor module Features: Mounting screw hole 3mm 5V DC power supply Analog output Threshold level output flip High sensitive microphone Power indicator light Comparator output is light |
1 | ||||||||||||||||||||||
| 32 | Single Channel Relay module | 5V Relay interface board, Equiped with high-current relay, AC250V 10A ; DC30V 10A Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) Comes with on board LED Indicator |
1 | |||||||||||||||||||
| 33 | RTC Module | PCB a single panel, size: 42mm * 24mm * 12mm(max) Colour: green (as the picture shows) with 4 holes, about 3.1mm in diameter genuine spare battery for the celestial sphere CR2032, Voltage 3V, current is 260mAh, non- rechargeable batteries. Crystal 32.768KHz, matching capacitance 6pF, size 2 * 6mm DS1302 made large 8-pin DIP chip, chip, IC Block below for easy replacement and plug the chip module operating voltage compatible 3.3V/5V, 5V and 3.3V microcontrollers can be connected with Operating temperature: 0– 70 VCC and GND must not be reversed, or it will burn the chip 51 MCU P0 port requires a pull-up if your single- chip pull-up resistor is not connected, you can port the data cable to the other |
1 | |||||||||||||||||||
| 34 | 4×4 Matrix Keyboard | The 4×4 Keypad features 16 push buttons arranged as 4×4. It contains high quality pcb with on board 16 push buttons. |
1 | |||||||||||||||||||
| 35 | RGB Three Color Module | KY-016 5mm RGB crystal LED RGB LED module consists of a plug-in full color LED made by R, G, B three pin PWM voltage input can be adjusted section three primary colors (red/blue/green) strength in order to achieve full color mixing effect. Control of the module with the Arduino can be achieved cool lighting effects. Features: RGB trichromatic limiting resistor to prevent burnout PWM adjusted color mixing Working voltage: 5V LED drive mode: Common cathode driver |
1 | |||||||||||||||||||
| 36 | Power Supply Module MB- 102 | Breadboard Power Supply Module Breadboard power supply module, with 5 V, 3.3 V output voltages Apply to any Standard breadboard Input voltage: 6.5-12 V (DC) or 5V USB power supply Output voltage: 3.3V and 5V can switch over Maximum output current: <700 ma Input voltage ON/OFF switch Independent control of upper and Lower BreadBoard Power Rails. Can switch over to 0 V, 3.3 V, 5 V using jumpers on any rail. On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use. Connectors: 1x Barrel 5mm Connector (center +ve) for Input Power 1x USB connector for 5V input or 5V output 4x 2 Pin Headers pointing downward for 3.3V or 5V output (to get output using flying wires) 1x 2×4 Header for 3.3V and 5V output 2x 1×4 selection jumper for 3.3V/OFF/5V |
1 | |||||||||||||||||||
| 37 | DC Motor with Fan / Wires | Standard DC Motor with soldered Connectors Operating Temperature: -10°C ~ +60°C Rated Voltage: 6.0VDC Rated Load: 10 g*cm No-load Current: 70 mA max No-load Speed: 9100 ±1800 rpm Loaded Current: 250 mA max Loaded Speed: 4500 ±1500 rpm Starting Torque: 20 g*cm Starting Voltage: 2.0 Stall Current: 500mA max Body Size: 27.5mm x 20mm x 15mm Shaft Size: 8mm x 2mm diameter Weight: 17.5 grams |
1 | |||||||||||||||||||
| 38 | PIR Sensor | HC-SR501 The PIR (Passive Infra-Red) Sensor is a pyroelectric device that detects motion by measuring changes in the infrared (heat) levels emitted by surrounding objects. When motion is detected the PIR Sensor outputs a high signal on its output pin. This logic signal can be read by a microcontroller or used to drive an external load. Dual output modes and a sensible design that performs within stated datasheet specifications are a few reasons over 100,000 units are in use around the world. Electrical Parameters： Product Type: HC–SR501 Body Sensor Module Operating voltage range: DC 4.5-20V Quiescent Current: <50uA Level output: High 3.3 V /Low 0V Trigger: L can not be repeated trigger/H can be repeated trigger (Default repeated trigger) Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second) Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds Board Dimensions: 32mm*24mm Angle Sensor: <100 ° cone angle Operation Temp: -15-+70 degrees |
1 | |||||||||||||||||||
Reviews
There are no reviews yet.